HPC 24″ x 12″ Torpedo H-Burner Hot Surface Electronic Ignition System

Description
Shipping
Specifications

Back

NEW!
Now available as a flat pan system.

How Our Electronic Ignition System Works

Start-Up: This is done by use of a wall switch or remote control. The system completes initial safety checks and starts the pilot gas flow when the ON command is received. After 5 seconds the hot surface igniter glows igniting the pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame.
Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures/voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence.
Shut Down: To turn OFF the fire pit simply use wall switch, remote control or whole house system.

Features:

Fully Assembled- ready to install. Control components are protected within valve box.
Start via wall switch, remote or whole house system; auto re-light if flame is lost.
Ignition is complete using a robust and reliable Hot Surface igniter.
On/Off models: Use optional wall switch or Remote Control available.
High/Low Flame Control Models: Adjust high setting to low setting- ~45% turn down (Remote Control included).
120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet.
24vac Option: Typically used poolside or with other lower voltage requirements.
Natural Gas or Liquid Propane: Factory built & tested for either fuel.
Internal temperature monitoring with overheat auto shutoff.
CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements.
Optional Controls: On/Off Remote, Timers, Power Supplies and an Emergency Shutoff.

On/Off Models: Includes the convenience and safety features- optional remote control available.

High / Low Flame Control Models: This option includes a smart remote control with 2-way communication with the fire pit. Remote allows flame height control while receiving information from fire pit to advise user of fire pit status (flashing LED).

The "ON/OFF" variation of this burner kit will require an external switch, timer, or optional remote (SKU: 578-C) to operate, while a remote control is included for the "HI/LO" variation. The "HI/LO" version of this burner kit is also compatible with the HPC smartphone app for added convenience. HI/LO units offer two flame height selections for user customizability. The "HI" setting offers maximum flame height and power, while the "LO" setting cuts the flame by 40 percent. In addition, the phone app allows on/off, timer, and troubleshooting functionality. NOTE: This product is not intended for use with small fuel tanks.

Back