Custom Fire Pit Kit 33" with Crossfire Ignition

• Custom Powdercoated Steel frame

• NEW!: CSA Certified  # 222047-1473502  electronic ignition system for installations where certification is needed.
  Our CSA Design Certified (Crossfire) Combustion Burner System is the newest state of the art outdoor patio flame system. Our Burner System's regulator was developed with a precise air to gas mixture ratio which produces a taller, brighter flame while using only half the fuel of conventional fire rings. This cutting edge technology has allowed our product to out perform all others on the market.

  Note: Can Not be used with Fire Glass

  19" flat aluminum burner pan with crossfire ignition system.
  80,000 btu's
  3v battery operated ignition system with on/off switch
  

These kits make it easy for you to create a true custom gas fire pit. Skin the frame with cement board and then add your choice of finish materials over the cement board. The fire pit frame takes the guesswork out of how to support your burner ring and fill material (lava rock, glass, outdoor logs...).

To determine actual finished fire pit size:
  For Width Add: 1/2" per side for cement board, 2" per side for stone veneer, 2" per side for top material overhang. (ie: 27"+1"+4"+4"=36")
  For Height Add: 1/2" for cement board, ?" for thickness of top material. (ie: 16" frame height + 1/2"cement board + 2" stone top = 18 1/2")
These dimensions are aproximate and will vary dependent on the actual material thicknesses you use