|
|
Burner Ring Specifications
Installation Requirements & Suggestions
Fire Pits, Fire Rings, & Complete Fire Pit Kits are for
OUTDOOR USE ONLY
Clearances from Combustibles
| |
Fire Ring |
Fire Ring
with Pan |
Complete Fire
Pit Kit
with Valve Box |
| Under |
8" |
6" |
0" |
|
Sides |
10" |
10" |
10" |
|
Over |
72" |
72" |
72" |
|
|
|
|
|
Preparation of Pit for Installation
We recommend that these products be installed and seviced by professionals who are certified in the U.S. by NFI (National Fireplace Institute). Installer must folow all instructions carefully to ensure propoer performance & safety.
-
For LP installations the fire ring must rest on a solid surface such as: Our Burner Pan, concrete, soil, sand, sheet metal. For natural Gas installations, any of the above may be used in addition to other materials such as lava rock, stones, gravel, brick or cincrete blocks.
-
The fire ring shoild be down about 4" from the top of the enclosure but no more than 8"
-
The fire ring should be enclosed around a circumference with a non-combustible material.
-
The fire ring is designed so the holes can be either on top or bottom. Since LP (propane) is heavier than air and tends to sink it is more difficult to light from above. It is strongly recommended that in LP installations the holes are left facing up. For natural gas installations either up or down is acceptable.
-
Fill area around and over the ring with a filler (lava rock) to a depth of about 1" over the ring. Build up the area to as much as 2" in the middle.
Complete Fire Pit Kit Dimensions
| All Sizes |
All Fire Pit Kits are approximately 8 1/2" from the bottom of the valve box to the top of the rim around the top of the burner |
| 13" pans |
Burner Pans are 13" inside diameter at the top of the pan with a 1" to 1 1/2" lip around the top |
| 19" pans |
Burner Pans are 19" inside diameter at the top of the pan with a 1" to 1 1/2" lip around the top |
| 25" pans |
Burner Pans are 25" inside diameter at the top of the pan with a 1" to 1 1/2" lip around the top |
| 31" pans |
Burner Pans are 31" inside diameter at the top of the pan with a 1" to 1 1/2" lip around the top |
| 37" pans |
Burner Pans are 37" inside diameter at the top of the pan with a 1" to 1 1/2" lip around the top |
For installations of a Complete Fire Pit Kit, Do Not fill the open interior of the pit enclosure with any void-filling material like gravel or lava rock. The interior space must be open to allow for heat transfer upwards and away from the valve control box.
Drainage must be provided inside the enclosure to prevent water accumulationg and interfering with the burner pan, wiring or valve control box |
|
Shop With Confidence
Best Prices
Best Service
Guaranteed!
Questions?
1-800-979-3267
303-792-0101
Business Hours
Mon-Sat 10:00 to 6:00
Sun 11:00 to 5:00
MST
Quick Ship
Most items ship within
1 business day
|
|